Power Off - Ibiza Light LZR300RGB-GOBO Manuel D'utilisation

Specifications
Power supply ........................................................ 100-240Vac via 12Vdc 1A mains adaptor
Red diode .................................................................................................. 100mW - 650nm
Green diode ................................................................................................ 50mW - 532nm
Blue diode .................................................................................................. 150mW - 450nm
Heat-up time ...................................................................................................... 2-8 minutes
Dimensions ............................................................................................... 106 x 104 x 55mm
Weight ......................................................................................................................... 0.42kg
Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid
vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure
and able to support a weight of 10 times of the unit's weight. Also always use a safety cable that can hold 12 times
the weight of the unit when installing the fixture.
Product Overview
1. MODE button
2. LED indicator
3. Microphone
4. Wireless remote sensor
5. R&G/R&B/G&B Laser output
6. Green laser dimmer
7. 12V Power in
8. Cooling fan
Operating Instructions
Manual Mode
Access to the 3 different operating modes via the MODE button on the front panel.
Mode description
1. Autorun and Sound-active auto-switching operation
The LED indicator on the front of the unit will be orange (or flashing orange) when the Autorun and Sound-active
auto-switching mode is selected.
2. Sound-Active Mode
The LED indicator on the front will be green when sound-active mode is selected.
3. Autorun
The LED indicator on the front will be red when autorun mode is selected.

4. Power off

The LED indicator on the front will be off.
Wireless Remote Control
The wireless remote control will immediately override the MODE button. No additional
settings are required.
1. Select Autorun mode or Autorun + Sound-active auto-switching mode
2. Sound-active mode
3. Power ON/OFF
4. Select laser color in forward order
5. Select laser color in reverse order
©Copyright Lotronic 2017 LZR300RGB-GOBO 3