CMi C-ABH-1010 C Notice Originale page 23

Noise emission specifications according to the German Product Safety Act
(ProdSG) or the EC Machinery Directive: The sound pressure level at the
workplace may exceed 80 dB(A). If this is the case, the user must take noise
protection measures (e.g. wearing appropriate hearing protection and tak-
ing regular breaks).
**) The specified vibration emission value was measured in accordance with a
normed test procedure and can be used in order to compare one tool with
another. The specified vibration emission value can also be used for an
introductory evaluation of the exposure. The vibration emission value may
fluctuate from the specified value during actual use of the power tool. These
fluctuations will depend on the way in which the power tool is used. Try to
keep vibrations to a minimum. One method of reducing the vibration load is,
for example, limiting the length of time you work with the tool. All parts of the
operating cycle must be taken into account for this purpose (for example,
also including times in which the power tool is switched off and times in
which it is switched on, but is running without load). Determination of vibra-
tion emission values in accordance with EN 60745-1 & EN 60745-2-13.
Approved lubricating oil
Spare parts are available from your local vendor.
GB
23