CMi C-ABH-1010 C Notice Originale page 22

GB
Cleaning and maintenance
Cleaning and maintenance overview
Prior to every start
What?
Check mains plug and
cable for damage.
Check all screwed con-
nections and tighten them
if necessary.
Regularly, depending on conditions of use
What?
Remove all dust from the
ventilation slits of the mo-
tor.
Lubricating the unit
Lubricating the unit
– Unscrew the lid (2) and fill with grease (recom-
mended grease: ► Technical data – p. 22).
Fault/malfunction
Machine is not working
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. The product can be returned free of charge
in accordance with the legal requirements, for exam-
ple through a municipal waste disposal company or a
dealer.
Batteries, rechargeable batteries and lamps
that are not permanently installed in waste
electrical equipment and can be removed in
a non-destructive way must be removed and
disposed of separately before disposal of the equip-
ment. Lithium batteries and rechargeable battery
packs of all systems are only to be handed in to the
waste collection points in a discharged state. The bat-
teries must always be protected against short circuits
by taping off the poles.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
22
How?
Inspect visually and, if
necessary, have the parts
replaced by a trained
electrician.
How?
Remove cuttings with a
vacuum cleaner or a
brush.
► Lubricating the unit –
p. 22
Cause
No mains voltage?
Electrical equipment of the motor
defective?
Storing, transport
DANGER! Risk of injury! Store the
machine in such a way that it cannot be
started by unauthorised people and that it is
inaccessible to children.
Ensure that no one can be injured by the
machine.
– Use the included transport case to store and
transport the machine.
Malfunctions and troubleshooting
In the event of a malfunction...
DANGER! Risk of injury! Improperly con-
ducted repairs may prevent your machine
from working safely. Such repairs will
endanger you and your surroundings.
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Remedy
Check cables, plug, socket and fuse
Contact your local vendor.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for recy-
cling.
Technical data
Article number
Rated voltage
Rated power
Protection class
Impact rate
Impact energy
Tool holder
Acoustic power (L )*
WA
Acoustic pressure (L
PA
Vibration**
Recommended lubricant
*) The noise emission values indicated have been measured according to a
standardized test method and can be used to compare one power tool with
another. The noise emission values indicated can also be used for a prelim-
inary assessment of the exposure. Warning: The noise emissions during the
actual use of the power tool may differ from the indicated values, depending
on the way in which the power tool is used, in particular what type of work-
piece is being machined. Safety measures must be defined to protect the
operator, based on an estimation of the vibration load during actual condi-
tions of use (taking into consideration all parts of the operating cycle, such
as time periods when the power tool is switched off and time periods when
it is switched on but running without a load).
350776
230 V~, 50 Hz
1100 W
II
-1
4200 min
10 J
SDS Max
102 dB(A)
(K = 3 dB(A))
)* 95 dB(A)
(K = 3 dB(A))
10,19 m/s²
(K = 1,5 m/s²)
Gear grease, free of
resins, non-acidic