Storage And Maintenance; Storage Of The Electrodes; Cleaning - VISIOMED BewellConnect MyTens Pro BW-TS1 Mode D'emploi

2. Stopping a session : Click on the Stop Button.
3. Evaluate your satisfaction level. The session is then recorded in the history.
4. To turn off the device, press the "On/Off" button.
5. Remove the electrodes from the skin. Detach from the edges.
6. Remove the device from the electrodes. If you forget the device for more than 5 minutes, it
turns off automatically.
If the device is used frequently throughout the day, it is advisable to charge it before starting a
new session.

5. STORAGE AND MAINTENANCE

5.1. STORAGE OF THE ELECTRODES

Replace the electrodes in their protective bag and close it well to avoid dust on the electrodes.
We recommend storing the electrodes in a place where the temperature is between 5 - 27 °C /
41 - 80.6°F. Avoid extreme heat and exposure to direct sunlight. Do not keep the electrodes in
the freezer or the refrigerator.

5.2. CLEANING

Warning : Never immerse the product in water and do not rinse it. Never immerse the elec-
trodes in water. Do not use cleaning agents other than those mentioned below. They could
cause serious damage to the equipment.
1. Using a damp cloth and mild detergent (eg: dishwashing liquid), clean the device. It is also
22 BewellConnect - BW-TS1 - User Manual - 122016V1