Panasonic Technics OTTAVA f SC-C70MK2 Manuel D'utilisation page 14

Network settings
Setting the network from the setup
menu
1 Press [>SELECT<] to select
"Chromecast built-in".
2 Press [SETUP].
3 Press [ ], [ ] repeatedly to select
"Network" and then press [OK].
• When "Wi-Fi Menu" screen is displayed,
press [OK].
4 Press [ ], [ ] to select "On" and
then press [OK]. (The wireless LAN
function is enabled.)
5 Press [ ], [ ] to select "Wi-Fi Setup"
and then press [OK].
• "Setting" is displayed.
6 Start the "Google Home" app and
follow the on-screen instructions.
(As follows)
14
(14)
(Continued)
■
Using the "Google Home" app
"Wi-Fi Setup"
When using the Chromecast-enabled apps to
play music on this unit, you need to set up a
network connection using "Google Home" app.
1 Start the "Google Home" app and
follow the on-screen instructions to
set up a connection.
• When the connection is established,
"Success" is displayed.
- "Fail" may be displayed if the connection
was not complete. Try this method again
from the setup menu. If "Fail" is still
displayed, try other methods.
2 Press [OK] to exit the setting.
Note
• This unit will be displayed as "Technics-SC-
C70MK2- **** " if the device name is not set.
****
(" " stands for characters unique to each
set.)
• You can check your network information (SSID,
MAC address and IP address) from the "Google
Home" app or "Technics Audio Center" app.
• Some items on the "Google Home" app are
irrelevant to this unit.