Command
set_IP_address
get_IP_address
SETNETWORKTYPE
GETNETWORKTYPE
SETSUBNETMASK
GETSUBNETMASK
SETDEFAULTGATEWAY
GETDEFAULTGATEWAY
GETDNS1
GETDNS2
INTERNETSPEED
Command
HPOS
VPOS
DOTCLOCK
AUTOPOS
GETOSDORIENTATION Get OSD orientation
GETHPOS
GETVPOS
GETDOTCLOCK
NETWORK COMMANDS
Description
Set static IP address of
eth0 network interface.
Get IP address of eth0
network interface. Usage:
get_IP_address
set network type (eg.
SETNETWORKTYPE
value) (value should
be 'wired', 'wireless' or
'disabled' as string)
get network type (eg.
GETNETWORKTYPE)
set subnet mask (subnet
mask value should be of
format nnn.nnn.nnn.nnn)
(eg. SETSUBNETMASK
nnn.nnn.nnn.nnn)
get subnet mask (eg.
GETSUBNETMASK)
set default gateway
(default gateway value
should be of format
nnn.nnn.nnn.nnn) (eg.
SETDEFAULTGATEWAY
nnn.nnn.nnn.nnn)
get default gateway (eg.
GETDEFAULTGATEWAY)
get DNS server 1 (eg.
GETDNS1)
get DNS server 2 (eg.
GETDNS2)
start internet speed test
VGA/PC COMMANDS
Description
Set horizontal position.
Set vertical position.
Set dot clock.
Set auto position
Get horizontal position.
Get vertical position.
Get dot clock.
English - 30 -
Parameter
str-int n Example: set_IP_
address 192.168.0.15
no parameter
string n ('wired', 'wireless' or
'disabled')
no parameter
string "nnn.nnn.nnn.nnn"
no parameter
string "nnn.nnn.nnn.nnn"
no parameter
no parameter
no parameter
no parameter
Parameter
int n (-25 ≤ n ≤ 25)
int n (-25 ≤ n ≤ 25)
int n (-50 ≤ n ≤ 50)
no parameter
no parameter
no parameter
no parameter
no parameter
Return
"#*IP address setting Succesfull
#*IP address setting NOK"
#*IPaddr: ...
#*Network type is set to: <network-
type>
#*the network type is <network-
type>
"#*set subnet mask: nnn.nnn.nnn.
nnn
#*setting subnet mask is failed"
#*the subnet mask is nnn.nnn.
nnn.nnn
"#*set default gateway: nnn.nnn.
nnn.nnn
#*setting default gateway is failed"
#*the default gateway is nnn.nnn.
nnn.nnn
#*DNS server 1 is nnn.nnn.nnn.
nnn
#*DNS server 1 is nnn.nnn.nnn.
nnn
" Speed test is started.
Prints ""No internet connection
found"" message if fails."
Return
"set horizontal position to ...
(percentage in the range)
#*invalid value entered"
"#*set vertical position to ...
(percentange in the range)
#*invalid value entered"
"#*set dot clock to ...
(percentange in the range)
#*invalid value entered"
#*set auto position
#*The OSD orientation ...
#*The horizontal position is ...
#*The vertical position is ...
#*The dot clock is ...