Installing Instructions - Alcad ALC-030 Manuel D'installation

VÍDEOPORTERO 2 HILOS KIT - 2-WIRE KIT VIDEODOOR ENTRY SYSTEMS - VIDÉOPORTIER 2 FILS KIT
INSTRUCCIONES DE INSTALACIÓN

INSTALLING INSTRUCTIONS

INSTRUCTIONS D'INSTALLATION
PLACA DE CALLE - ENTRANCE PANEL - PLAQUE DE RUE
RECOMENDACIONES - RECOMMENDATIONS - RECOMMANDATIONS
When deciding where to position the entrance panel support, choose an area of wall which is smooth, even and hard. We recommend
that you use the fixing points at the four corners. Bear in mind the dimensions of the entrance panel which will later be attached to the
support and make sure that you leave enough space around the support to be able to manoeuvre the entrance panel and attach it
correctly.
Avoid positioning it in places where there are sources of direct light, thereby preventing undesired effects (background lights, reflections,
etc.) when viewing the image.
1
Nota:
Attach the support of the entrance panel to the
wall using the rawlplugs and screws provided.
Position it vertically so that the its top is 1.7 metres
from the ground.
Note: Always respect the technical norms in force
with regard to accessibility.
Note :
2
Lever open each pushbutton unit and insert the
card identifying the pushbutton.
You can use either the pre-printed cards which
are provided or print your own using the template
available from the Support => Downloads section
of the Alcad web site: www.alcad.net.