Publicité
Les langues disponibles
Les langues disponibles
General
3
General
3.1
Authorized use
The VZ-HS kerbstone clamp is only suitable for laying and transporting one kerbstone at a time (made of granite
and concrete) in conjunction with any carrier equipment such as hydraulic excavators, wheel loaders, backhoe
loaders, forklifts, truck-mounted loading cranes or laying machines (VM-X-PAVERMAX, VM-301, VM-203, VM-401,
VM-204).
Peculiarities of the VZ-HS:
•
The gripping range of the VZ-HS is full hydraulically adjustable.
•
Absolute synchronism of both gripping elements through rack gear compensation and 2-HD-cylinders.
•
Low maintenance slide bearing (steel/Polyamide).
•
Handles for the optimal guiding of the device (VZ-HS).
•
Pressure control valve for overload protection of all components on this device.
•
Norm flange plate for the fitting on any support frame.
It is not allowed to grip a kerb stone which is conical, only rectangular, because it could fall
down!
•
The device is only designed for the use specified in this documentation.
•
Every other use is not authorized and is forbidden!
•
All relevant safety regulations, corresponding legal regulations, especially regulations of the
declaration of conformity, and additional local health and safety regulations must be observed.
Prior to every operation the user must ensure that:
•
The equipment is suited to the intended operation
•
the functioning and the working condition of the equipment is examined
•
the load is suitable to be handled.
Any doubts about instructions should be raised with the manufacturer prior to use.
ATTENTION: The use of this device is only permitted in proximity to the ground (→ chapter
"Safety at work" and "Explanation of basic concepts").
Only stone elements with parallel and plane surface are allowed to be picked-up and handled.
Because the gripping good could fall down.
51600014
11 / 23
GB
Publicité
