oticon TV Adapter 3.0 Mode D'emploi page 10

Connecting to a power outlet
Use the power supply
1. Plug the power cord into the "power" connector on the TV Adapter (A).
2. Plug the power supply into the wall socket (B).
3. Check that the power is turned on; after a few seconds both indicators
will fade blue to indicate that pairing with your hearing aids is needed.
See page 22.
IMPORTANT NOTICE
When charging the TV Adapter use the supplied original
power supply 5.0V/1A, CE and safety marked.
10 About Installation Handling Warnings More info