Product & Accessories - LEGRAND 430 521 Manuel D'utilisation

MAIN PART DESCRIPTION
• Product & Accessories
Surface Mount B racket
Mounting Screw Hole
Dome Cover
A ssembly Stud
DIP Switch
• Dome Cover
Do not detach the protection vinyl from the dome cover before finishing all the installation process to protect
the dome cover from scratches or dust.
• Dome Cover Lock-up Screw
Used to lock up the dome cover after assembling the dome cover with the main body.
• Dome Cover Assembly Stud
Used to line up the stud on the main body and the stud on the dome cover when assembling the dome cover
with the main body.
• DIP Switch
Used to set up camera IDs and protocols.
• Surface Mount Bracket & Mounting Screw Hole
Used for surface mount type, wall mount type and ceiling mount type. They are not used for in-ceiling mount
type.
•
Main Connector
Used for the power wire, the video cable and the RS-485 communication cable connection.
• Sensor I/O Port
Used for the sensor in/out connection.
Main Connector
Sensor I/O Port
Dome Cover L ock-up Screw
Dome Cover
22