Malfunction Indications Appearing On The Display - Fulgor Milano F7PBM36S1 - R Mode D'emploi

EN
Contact a plumber or a water treatment expert to
make sure that the problem is not due to the water
supply.
If the unit you purchased was used as a
showroom model it may be in a special en-
ergy-saving mode called Demo Mode where
the appliance appears to be operating (lights
work and false temperatures are displayed)
but no cooling actually takes place. If you sus-
pect your appliance is in Demo Mode please
contact your point of purchase for assistance
with disabling this feature.

11.2 Malfunction indications appearing on the display

Display message
Power Failure!!
Door Fridge OPEN
Fresh Zone OPEN
Replace filter
Fridge too warm
Fridge too cold
Fresh Zone too warm
Fresh Zone too cold
Error Code...
Check condenser
24
Malfunction description
Prolonged interruption of electrical power
the appliance resumes work automatically, the display shows the warmest
temperatures achieved
Fridge door open
the message appears after few minutes from the door opening
Freezer door open
the message appears after few minutes from the door opening
Replace filter cartridge
message appears when only 30% of filter capacity is left
Fridge too warm
see Troubleshooting Guide
Fridge too cold
wait for 12 hours: if malfunction persists call Customer Care for advice
Freezer too warm
see Troubleshooting Guide
Freezer too cold
wait for 12 hours: if malfunction persists call Customer Care for advice
Functional problems
call Customer Care who may help you to salve the problem or put you in
contact with the nearest Service Agent
Check Condenser
Every 6 months the display shows the message "Check Cond", clean the
condenser and press for 5 seconds the Enter button to reset.