Hamilton Beach SC30 Manuel D'utilisation page 9

Probe Mode
1
Make sure probe is in center of
food and not touching bottom of
crock.
5
Press arrows to select desired
heat setting. Select HIGH or LOW.
NOTE: Do not use Warm setting
to cook food.
w WARNING
Before First Use: Wash glass lid and crock in hot, soapy water. Rinse and dry.
2
Insert probe into jack on side of
slow cooker.
6
Enter ( )
Press . Desired Temp
will illuminate.
Electrical Shock Hazard. To reduce the risk of electrical shock, do not
immerse base in water.
3
Press ON (I).
NOTE: To change temperature
display from ºF to ºC:
Press ( ) then Enter ( )
Probe
at the same time.
The temperature in ºC will
now be displayed.
If slow cooker is unplugged, it
will reset to ºF.
4
( )
Press Probe . Heat setting will
be illuminated.
7
Press arrows to select desired
temperature.
9