Nyne NB-200 Manuel Utilisateur page 17

6
Hold the screw handle to
lift up the screw and turn
clockwise to ensure tight
fastening, and then pull
down the screw handles.
NYNE_NB-200_User Manual_A6_V1.1.indb 17
To detach the handlebar mounting bracket:
1
Erect the screw handle
and turn counterclockwise
to loosen the screw but do
not unscrew completely,
until you can take the
screw handle out from the
dent on the clamp.
2
Detach the device from
the handlebar stem.
3
Hold the locker on each
bracket and pull the
brackets out from the rails
one by one.
17
EN
5/27/2012 9:12:27 PM