5�4 Flash Function; 5�5 Blackout Function; 5�6 Spotlight Illumination When Switching On The; Specifications - IMG STAGELINE LC-324DMX Mode D'emploi

5.4 Flash function
The button FLASH (10) can be used to quickly
set the channels of any spotlights selected to the
maximum value . When the button is released,
all channels will go back to their previous values .
Note: It is not possible to use the flash function together
with the strobe effect of the controller (
5.5 Blackout function
To black out all spotlights, press the button
BLACK OUT (11) . To switch on the spotlights,
press the button once again .
5.6 Spotlight illumination when
switching on the controller
To define the spotlights to be illuminated and
also their lighting colour when the controller is
switched on:
1) Use the buttons FIXTURE (1) to select the
spotlights to be illuminated whenever the
controller is switched on .
2) Press the button FADER (9) and use the con-
trols (4) to make the desired settings .
Alternatively, select a program (
ter 5 .1) to be executed by the spotlights
selected .
3) To save the settings, press the button LIGHT
BLUE (2) and the button FLASH (10) at the
same time . Eight green LEDs will briefly light
up to confirm the process .
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
☞ chapter 5 .2) .
☞
chap-
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
®

6 Specifications

Data protocol: � � � � � � � � � � DMX 512
Number of DMX channels: � 4 × 6 max� from 32 chan-
Power supply: � � � � � � � � � � ⎓ 9 – 12 V via power
Ambient temperature: � � � � 0 – 40 °C
Dimensions: � � � � � � � � � � � 242 × 156 × 62 mm
Weight: � � � � � � � � � � � � � � � 1�5 kg
Subject to technical modification .
nels
supply unit provided and
connected to 230 V/50 Hz
15