Percent Weighing - OHAUS PR Série Manuel D'instructions

EN-10
Item Settings
To view or adjust the current settings.
Sample size: The sample size ranges from 1 to 100. The default
value is 10.
Note: If the APW of the last parts counting operation needs to be
kept, the user can press No when the display shows the message
Clr.Apwj (clear the average piece weight. Place additional objects on
the pan, and the corresponding number of pieces will display.
APW Optimization:
Improving counting accuracy by re-calculating the piece weight
automatically as parts are added.
APW Optimization occurs only when the number of pieces added to
the pan is between one and three times the number already on the
pan.
Print Settings:
Changing printing setup. See Section 7 for more information.
4.3

Percent Weighing

Note: Before using any application, be sure the balance has been leveled and calibrated.
Use Percent Weighing to display the weight of a test object as a percentage of a pre-established reference
sample.
Note: The minimum reference weight should be no less than 0.1d.
Percent Weighing
1. Press and hold the Function / Mode button until PerCent
appears.
2. After confirmation by pressing Yes, the message Clr.ref
(clear the reference) will appear on the screen.
PR Series Balance