Electromagnetic Compatibility (Emc) - Gima 27363 Notice D'utilisation

21
Handle

Electromagnetic compatibility (EMC)

The podoscope needs special precautions concerning electromagnetic
compatibility (EMC) and must be installed and operated according to the
EMC information contained in this manual.
In order to avoid possible risks of electromagnetic interferences, do not use
radio frequence portable or mobile devices near the podoscope.
Generally the podoscope should not be used near or together other
equipements; in the case this would not be possible, it's necessary to observe
its operativity to verify the normal functioning.
GUIDANCE AND MANUFACTURER'S DECLARATION – ELECTROMAGNETIC EMISSIONS
The equipment 27363 is intended for use in the electromagnetic environment specified below.
The customer or the user of the equipment 27363 should assure that it is used in such an environment
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
130 cm
51.19 in
Compliance Electromagnetic environment – guidance
Group1 The equipment 27363 must emit electromagnetic
energy in order to perform its intended function.
Nearby electronic equipment may be affected.
Class B
The 27363 is suitable for use in all establishments
Compliant other than domestic and those directly connected
to the public low-voltage power supply network
that supplies buildings used for domestic purposes
Compliant
ENGLISH
Handle
15 cm
5.9 in
Podoscope