Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Switch action
CAUTION:
•
Before plugging in the tool, always check to see
that the switch trigger actuates properly and returns
to the "OFF" position when released.
For Model 9005B
CAUTION:
•
Switch can be locked in "ON" position for ease of
operator comfort during extended use. Apply cau-
tion when locking tool in "ON" position and maintain
firm grasp on tool.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop. For continuous operation, pull
the switch trigger and then push in the lock button. To
stop the tool from the locked position, pull the switch trig-
ger fully, then release it.
For Model 9005BY
To prevent the switch trigger from accidentally pulled, a
lock-off button is provided. To start the tool, press in the
lock-off button and pull the switch trigger. Release the
switch trigger to stop.
For Model 9005BZ
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
ASSEMBLY
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
007353
1. Trigger
2. Lock button /
Lock-off button
1
2
001045
1. Switch trigger
1
Installing side grip (handle)
CAUTION:
•
Always be sure that the side grip is installed
securely before operation.
Screw the side grip securely on the position of the tool as
shown in the figure.
Installing or removing wheel guard
CAUTION:
•
When using a depressed center grinding wheel/
Multi-disc, wire wheel brush or cut-off wheel, the
wheel guard must be fitted on the tool so that the
closed side of the guard always points toward the
operator.
Mount the wheel guard with the protrusion on the wheel
guard band aligned with the notch on the bearing box.
Then rotate the wheel guard around 180 degrees. Be
sure to tighten the screw securely.
To remove wheel guard, follow the installation procedure
in reverse.
Installing or removing depressed center grind-
ing wheel/Multi-disc
WARNING:
•
Always use supplied guard when depressed center
grinding wheel/Multi-disc is on tool. Wheel can
shatter during use and guard helps to reduce
chances of personal injury.
5
001055
001063
1. Wheel guard
2. Bearing box
3. Screw
1
3
2
Publicité
Table des Matières
