Replacing The Bulb - Pelgrim Ovs826Rvs/P26 Manuel D'utilisation

REPLACING THE BULB

The bulb is a consumable and therefore not covered by warranty. Before changing the
bulb, remove the trays, the grid, and the guides.
Use a Phillips (cross) screwdriver. (Halogen lamp: G9, 230 V, 25 W)
44
c b a
1
Remove the four screws from the cover
panel. Remove the cover panel, the glass
and the sealing ring.
2
Remove the bulb and install a new one.
Please note: the light bulb can be very
hot! Use protection to remove the bulb.
Replace the cover panel, the glass and the
sealing ring.
Attention: The sealing ring needs to fit
perfectly in the oven wall recess.