Polaris 2878216 Mode D'emploi page 19

DOOR KIT
KIT PN 2878216
19. Install the upper seal trim (#34) onto the frames
installed in steps 17 and 18 while begin with the
lower part.
Cut excess of seal trim.
20. Position and fasten the
the rear panel kit using
machine screws (#19), a
machine screw (#20),
(4) M8
flat washers (#22).
(4) M8
7515127-521E
A-7515127 Rév. C
hinge brackets (#29) onto
(2)
Torx socket
(3) M8-1.25 X 30mm
Torx socket
M8-1.25 X 50mm
lock washers (#24), and
LEFT SIDE VIEW
21. Position the left door assembly (#1) and fasten using
hinge pins (#30). Verify that the closed door is
(2)
well in contact with all seals.
Do the adjustments and secure using
retaining rings (#25).
22. Install the security tie-down (#33) using the
serrated flange bolts (#26) as illustrated.
M8-1.25
Tighten all bolts, machine screws, and nuts.
23. Repeat steps 12 to 22 for the opposite side.
- 7 -
(2) 9.5mm
(2)
Imprimé en Chine / Printed in China