GB
MT
Turn the chain bar
Use cut-protection gloves when han-
dling the chain or the chain bar.
Theblade(7)hastobereversedregularly
afteraworkingtimeofapproximately10
hours in order to ensure even wear.
1. Switch off the device and remove the
16)beforecarryingout
battery (
any maintenance work.
2. Remove the sprocket chain wheel cov-
ering(13),thesawchain(6)andthe
chainbar(7).
3. Turn the blade around its horizontal
axisandinstallthebladeandchainas
describedunder"Installingthesawing
chain and blade".
Whendoingso,payattentiontothe
correct rotation direction of the saw
chain!
Use the graphical symbol below the chain
sprocket(20)asaguidetothealignment
ofthesawchain(6)whenthebladeis
rotated.
Storage
• Cleantheequipmentbeforeputtingit
away.
• Alwaysemptytheoiltankbeforepau-
ses in operation lasting several weeks
because the bio chain oil can become
resinous and block the oil outlet channel
30 ).
(
Dispose of used oil in an environmen-
tally-responsible way (see "Disposal/
Environmentalprotection").
60
Direction of travel of the
saw chain
• Putonsawbarprotectionsheath.
• Storetheapplianceinadryplacewell
out of reach of children.
Waste disposal
and environmental
protection
Emptytheoiltankbeforedisposingofthe
device. Remove the battery from the device
andtakethedevice,wasteoil,accessories
and packaging for environmentally friendly
recycling.Instructiononhowtodispose
of the rechargeable battery and charger
can be found in the separate instruction
manual.
Machines do not belong with do-
mestic waste. The crossed out waste
bin symbol means that this pro-
duct must not be disposed of with
household waste after its service life.
Directive2012/19/EUonwasteelectrical
and electronic equipment: Used electrical
devices must be collected separately for
disposal and recycled in an environmen-
tally sound manner.
Depending on the implementation in na-
tionallaw,youmayhavethefollowing
options:
• Returntoashop,
• Handovertoanofficialcollection
point,
• Returntothemanufacturer/distributor.
We will dispose of any defective devic-
es that you send to us free of charge.
This does not affect accessories enclosed
with the old devices or tools without any
electrical components.