JARDIBRIC BL-IS6 Guide D'installation Rapide page 19

4- MOUNTING AND WIRING MODULE
The BL-IS6 must be fixed indoor only with the supplied screws.
- It must be installed as near as possible to a power outlet.
The power outlet must always be accessible in order to unplug the device
in case of emergency.
- Make sure the power outlet where the adapter is plugged has a protection against
over-current and short-circuit - protection breaker for 16A (20A for US).
Use only power supply provided with product 24Vac 0.75A.
Max operating temperature : 45°C.
Then
Direction
of installation
112 mm
Use 24Vac Solenoid with electrovalves
19