Applied Parts; Environmental Conditions - Flaem Masterneb P0404Em F400 Mode D'emploi

NEBULIZER TECHNICAL SPECIFICATIONS
Model: RF6-12
NebulizeR RF6 Basic
2
Minimum drug capacity:
Maximum drug capacity:
TECHNICAL SPECIFICATIONS OF DEVICE
Model: P0404EM F400 combined RF6-12
Operating pressure (with neb.):
Release:
(1)
MMAD:
(2)
Respirable fraction < 5 μm (FPF)
(2)
(1) Data collected according to Flaem's internal procedure.
(2) In vitro characterisation performed by TÜV Rheinland Italia S.r.l. in cooperation with the University of Parma. More
details are available on request.

APPLIED PARTS

Type BF applied parts are:
Weight:

ENVIRONMENTAL CONDITIONS

Operating conditions:
Ambient temperature
Relative air humidity
Atmospheric pressure
Storage and transport conditions:
Ambient temperature
Relative air humidity
Atmospheric pressure
DURATION
Model: P0404EM F400
(Compressor unit)
Model: RF6-12
(Nebuliser and accessories)
2 ml
8 ml
0,6 bar.
Standard mode
0.25 ml/min approx.
:
patient accessories (B3, B4, B5)
1.300 Kg
Between +10°C and +40°C
Between 10% and 95%
Between 69 KPa and 106 KPa
Between -25°C and +70°C
Between 10% and 95%
Between 69 KPa and 106 KPa
Service life 400 hours.
The expected average life is 1 year, however it is advisable to replace the
nebuliser every 6 months during intensive use (or sooner if the nebu-
liser is clogged) to ensure maximum therapeutic effectiveness.
18
High speed mode
0.32 ml/min approx.
3.06 μm
73.97