Safety Instructions - Batavia MAXXSERIES BT-EF002 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Safety instructions

WARNING Read all safety
warnings and all instruc-
tions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury. Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warn-
ings refers to your mains-operated
(corded) power tool or battery-oper-
ated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
b. Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
liquids, gases or dust. Power
tools create sparks which may
ignite the dust or fumes.
c. Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2. Electrical safety
a. Power tool plugs must match
the outlet. Never modify the plug
in any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodified plugs and
matching outlets will reduce the
risk of electric shock.
b. Avoid body contact with earthed
or grounded surfaces, such as
pipes, radiators, ranges and
refrigerators. There is an
increased risk of electric shock if
your body is earthed or grounded.
7062051-Electric_file-Ma-1803-06.indb 11
c. Do not expose power tools to
rain or wet conditions. Water
entering a power tool will increase
the risk of electric shock.
d. Do not abuse the cord. Never
use the cord for carrying, pulling
or unplugging the power tool.
Keep the cord away from heat,
oil, sharp edges or moving
parts. Damaged or entangled
cords increase the risk of electric
shock.
e. When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use
reduces the risk of electric shock.
f. If operating a power tool in a
damp location is unavoidable,
use a residual current device
(RCD) protected supply. Use of
an RCD reduces the risk of electric
shock.
3. Personal safety
a. Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use a power tool while you
are tired or under the influence
of drugs, alcohol or medication.
A moment of inattention while
operating power tools may result in
serious personal injury.
b. Use personal protective equip-
ment. Always wear eye protection.
Protective equipment such as dust
mask, non-skid safety shoes, hard
hat, or hearing protection used for
appropriate conditions will reduce
personal injuries.
c. Prevent unintentional starting.
Ensure the switch is in the
off-position before connecting
to power source and/or battery
English
11
06-03-18 16:54

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

7062051

Table des Matières