1. Warnings
Please note! Pay strict attention to the
following instructions:
The device must be disconnected from the
●
electric power supply before carrying out
any installation work.
Installation or maintenance must be
●
performed by a qualified technician, in
compliance
instructions and local safety regulations.
Do not repair or replace any part of the
device unless specifically stated in the
operating manual.
By law, the appliance must be earthed.
●
The power cable must be long enough to
●
allow the device built into the unit to be
connected to the power supply.
In order for the installation to comply with
●
current safety regulations, an approved
omnipolar circuit breaker is required that
guarantees complete disconnection of the
mains in over voltage category III, in
accordance with the installation rules.
Do not use power strips or extension cords.
●
Once installation is complete,the
●
with
the
manufacturer's
3