Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION INSTRUCTIONS / STEP 15 / STEP 16
STEP 15: INSTALL RIGHT SIDE
WALL PANEL (10)
15a. Locate Panel (10) Right Side Panel
and lay it down on a flat surface.
15b. Based on your measurements from
Step 1 (How to Measure), make
any required plumbing cut-outs
according to the instructions in
Step 2 (How to Cut).
Note: If you are not using the full
width of the left side panels, cut
the left/inside end of the panels as
the back corner will be caulked later
in the installation and any flaws in
the cut can be hidden in the
process.
(Do not cut off the interlocking
feature, adjust width only).
15c. Repeat Steps 4c. - 4e.
STEP 16: INSTALL RIGHT SIDE
WALL PANEL (11)
16a.
Locate Panel (11) Right Side Panel
and lay it down on a flat surface.
16b.
Based on your measurements from
Step 1 (How to Measure), make
any required plumbing cut-outs
according to the instructions in
Step 2 (How to Cut).
Note: If you are not using the full
width of the right side panels, cut
the left/inside end of the panels as
the back corner will be caulked later
in the installation and any flaws in
the cut can be hidden in the process.
(Do not cut off the interlocking
feature, adjust width only).
11c.
Repeat Steps 4c. - 4e.
15
16
16
10
9
10
9
11
10
9
11
10
Publicité
