Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION INSTRUCTIONS / STEP 5 / STEP 6
STEP 5: INSTALL BACK WALL PANEL (2)
5a. Locate Panel (2) Back Wall Panel and lay it
down on a flat surface.
5b. Based on your measurements from Step 1
(How to Measure), trim the width equally from
both ends of panel. (Do not cut off the
interlocking feature, adjust width only).
5c. Repeat Steps 4c. - 4e.
STEP 6: INSTALL BACK WALL
PANEL (3)
6a. Locate Panel (3) Back Wall Panel
and lay it down on a flat surface.
6b. Based on your measurements from
Step 1 (How to Measure), trim the
width equally from both ends of
panel. (Do not cut off the
interlocking feature, adjust
width only).
6c. Repeat Steps 4c. - 4e.
5
2
1
6
3
2
10
2
1
3
2
1
Publicité
