Mettler Toledo EasyClean 350 e Instructions D'utilisation page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EasyClean 350 e
EasyClean 350 e
52 500 194
Compressed air supply
Connection to
retractable housing
Flushing water supply
Pump
Viscosity
Wetted materials
Liquid temperatures
Subject to technical changes.
4 – 8 bar (400 – 800 kPa, 58 – 116 psi)
Air quality according to ISO 8573-1
Moisture class 4 (water dew point +3 °C/+37.4 °F)
Particles class 5 (filter 40 µm)
Max. oil content class 2 (0.1 mg/m
1
Connection: thread G
/
"
8
Pneumatics:
LDPE hose
(control air)
Medium:
PTFE hose
Hose length typ. 5 m (16.4 ft)
Hose length max. 10 m (32.8 ft)
Pressure:
2 – 8 bar (200 – 800 kPa, 29 – 116 psi)
Particle filter:
50 µm
≥ 4 l/min
Volume:
1
Connection:
thread G
/
4
1
Adapter:
/
" NPT male (PP)
4
Pump height: max. 5 m (16.4 ft)
Suction height: max. 3 m (9.8 ft)
Feed rate:
3 – 5 ml/s (depending on hose length and
medium viscosity)
Materials:
PPS (pump body)
EPDM (membrane and sealings)
1
Connection:
thread G
/
8
All liquids 25 mPa s / 25 °C (77 °F)
Materials in contact with:
– rinsing water:
PP, EPDM, PFTE, PPS, Ni
– compressed air: PP, EPDM, PFTE, PPS, LDPU, Ni
– buffers:
PP, EPDM, PTFE, PPS, LDPU
– cleaning agents: PP, FFKM, PPS, PTFE, EPDM, PEEK
Water:
0 ... 80 °C, 95 °C max. 10 min/h
(32 ... 176 °F, 203 °F max. 10 min/h)
Buffers:
0 ... 50 °C (32 ... 122 °F)
Cleaning agents:
0 ... 50 °C (32 ... 122 °F)
© 04/07 Mettler-Toledo AG, CH-8606 Greifensee
3
)
1
1
6/4 mm (
/
" /
/
")
4
8
1
1
6/4 mm (
/
" /
/
")
4
8
" female
" female, polymer (PP)
Printed in Switzerland
9

Publicité

Table des Matières
loading

Table des Matières