Intended Use; Technical Description - Dometic SINEPOWER MCR7 Notice D'utilisation

MCR7
Please read this instruction manual carefully before first use, and store it in a safe place.
If you pass on the product to another person, hand over this instruction manual along
with it.
Contents

1 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Technical description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4 Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5 Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1 Intended use
The MCR7 remote control is suitable for switching on/off the following inverters via the "remote
port II" (see also the operating manual for the inverter):
• MSP702, MSP704, MSP1012, MSP1014, MSP1512, MSP1524, MSP2012, MSP2024,
MSP2512, MSP2524
• MSI912, MSI924, MSI1312, MSI1324, MSI1812, MSI1824, MSI1812T, MSI1824T, MSI2312T,
MSI2324T, MSI3512T, MSI3524T
2 Technical description
2.1 Power display
No. in
fig. 1,
Description
page 2
1 Battery
2 Output Power
EN
Meaning
This bar graph shows the battery voltage in volts.
The display should be in the green area. If the display is above
or below in the red area, a warning tone sounds, the display
flashes and the inverter will be switched off.
This bar graph displays the output power received by the
appliance as a percentage.
The display should be in the green or orange area. If the display
goes over into the red area, a warning tone sounds, the display
flashes and the inverter will be shut off.
Intended use
3