Watts WFHC-MASTERH&C-BUS & SLAVE Guide Utilisateur page 7

PROGRAM menu:
Use this menu to create or choose a program for each zone.
By pressing (+) & (-) keys the zone number starts to blink,
If you select a zone number 01 to 12 and press (OK), you could select a weekly program to be followed for this zone.
The program numbers start to blink:
daily program.
If you select a built in program "P1" to "P9" or a user program "U1" to "U12", and press (OK), then this program will be
followed in mode.
Built-in programs description:
P1: Morning, Evening & Week-end
P2: Morning, Midday, Evening & Week-end
P3: Day & Week-end
P4: Evening & Week-end
P5: Morning, Evening (bathroom)
User Program Edition:
The (+) key sets
the current blinking program hour
The (-) key sets temperature at
the current blinking program hour
Use (◄) & (►) keys to slide the blinking cursor position in the day and modify or correct easily the program.
When the displayed day is correct press (OK) to jump and copy the daily program to the following day.
When you press (OK) on day "7" you will come back to the top menu.
Now your program is created, it will be followed in
Zone number
Shows the
temperature at
P6: Morning, Afternoon & Week-end
P7: 7h - 19h (Office)
P8: 8h - 19h, Saturday (Shop)
P9: Week-end (Secondary House)
if you select it for a zone.
7
Use (◄) or (►) to see the
others days in the program
Program number
Shows the daily
program
Use (◄) or (►) to see the
others days in the program
Use (+) or (-) to select a
program number.
Day
Hour at the
cursor position