SECTION 8 (CONTINUED) /
TOOLS AND HARDWARE REQUIRED /
8.6
• Secure the two corner Panels together using a
Corner Channel (AFR) and twelve (12) Screws (ADZ).
• Attachez les deux panneaux l'un à l'autre à l'aide
d'un canal angulaire (AFR) et douze (12) vis (ADZ).
• Sujete los dos paneles entre sí usando un canal
angular (AFR) y doce (12) tornillos (ADZ).
8.7
• Starting at the right, attach the next
three Wall Panels along the rear of the
Floor, and secure them together using six
(6) Screws (ADZ) at each seam.
• En commençant au côté droit, attachez
les trois panneaux muraux suivants
le long du bord arrière du plancher.
Attachez les panneaux les uns aux autres
à l'aide de six (6) vis (ADZ) à chaque
jointure.
• Empezando al lado derecho, sujete los
próximos tres paneles murales a lo largo
del borde trasero del piso, y sujételos
usando seis (6) tornillos (ADZ) a cada
juntura.
SECTION 8 (SUITE)
/
SECCIÓN 8 (CONTINUACIÓN)
OUTILS ET QUINCAILLERIE REQUIS
ADZ (x30)
AFR
77
"
77 1/2 in/po (1,97 m)
1/2
/
INSTRUMENTAL Y HERRAJE REQUERIDOS
AHD
ADZ (x12)
AHD
AHD
AHD
38 38