Tenovis CS 578 Notice D'utilisation page 42

Changing basic settings on the base station
Cancelling the
dialling bar
Notes:
Determining
which mobile
unit rings
(only when several
mobile units are used
with one base station)
Notes:
Entering the
exchange code
Notes:
Entering a dial
pause
Entering the dial
pause manually
during phone
number input
42
Scroll to menu
item 28 or 30
S The dialling bar is cleared for all mobile units when you scroll
away from the menu item.
Scroll to menu item 31
"Call assignment"
1 6
. . .
Enter call number for
barring (e.g. 0180)
S If hunt group is not to be switched: Enter "0" as the time.
S If the mobile unit entered for the priority call is unavailable, hunt
group is switched to after a short time.
Scroll to menu item 33
"Exchange code"
S Clear the exchange code: Press the "Clear" key several times if
necessary until no more digits are displayed.
Scroll to menu item 34
"Dial pause"
Press the "Home"
key at the desired
position for longer
than 2 seconds
C
Clear the displayed mobile unit
numbers and phone numbers
0
Enter internal numbers of the
mobile units for which dialling
bar 1 is to apply
C 1
. . .
Clear the old Enter the time after which
entry hunt group (all mobile
if necessary. units ring) is to be
switched.
1
. . .
Enter the exchange code of your
PABX (max. 3 digits).
0 9
. . .
Enter pause which is to be made
after dialling the exchange code
(in seconds)
069-7505
The telephone makes a dialling pause
of the pre-set length. The dial pause
appears as a hyphen in the display.
continued
6
9