Kreg TRACK HORSE Guide D'utilisation page 7

CUTTING SETUP
1
Place two Track Horses
maximum 7 feet [2m] apart.
2
Support Brackets in upper position,
one 2x4 in each pair of Brackets.
3
Sacrificial 2x4 installed on
each Mobile Project Center.
(see MOUNTING A SACRIFICIAL 2X4)
4
Workpiece rests on 2x4s and
sacrificial 2x4s.
5
Distribute weight uniformly.
WARNING:
Maximum load, two Track Horses used together,
2,200 lb. [998 kg.], evenly distributed
BRACKET POSITION: CUTTING SETUP
Mount the Support Brackets in upper slots.
GROUND-LEVEL MODE
Use a pair of Track Horses with the legs
folded in TABLE SETUP (leg brackets
resting on the ground) to create a low-height
assembly table or in CUTTING SETUP
(leg brackets resting on the ground)
for cutting large, heavy sheet goods.
SETUP
2
4
3
2
4
4
2
1
3
2