Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GUIDELINES FOR EXTENSION CORD USE
Extension cords are only to be used for temporary purposes.
They do not replace the need for installation of outlets and
proper wiring where necessary.
IN THE SHOP AND ON CONSTRUCTION SITES:
1. Extension cords with an equipment grounding conductor
must be used at all times.
2. Extension cords must be protected from damage,
and not run through doorways or windows where the
doors or windows may close, causing damage to the cord.
3. Extension cords should be a minimum of 16 AWG and be
rated for the equipment in use.
4. Extension cords must be periodically inspected to ensure that
the insulation and conductivity of the wires are not compromised.
5. Extension cords should not be run through water or allowed to
have connections that may be exposed to accumulated water.
TABLE 1
NAMEPLATE
AMPERES
25'
@120 V
0 - 5
16
5.1 - 8
16
8.1 -12
14
12.1 - 16
12
NR – NOT RECOMMENDED
ELECTRICAL SHOCK HAZARD :
electricity. Avoid any condition that causes electrical contact. Improperly grounded
power tools present a hazard of electrical shock that can result in serious bodily
injury or death, particularly when used in a damp location, in proximity to plumbing
and other earthed surfaces, or outdoors.
WARNING :
This product can expose you to chemicals including Carbon Black,
which is known to the State of California to cause cancer. For more information go to
www.P65Warnings.ca.gov.
Kreg Tool Company warrants to the original purchaser only, that
the Kreg Track Horse will be free from defects in material and
workmanship for a period of three (3) years from date of purchase.
Kreg Tool Company will, at its option, repair or replace any product
(or component part thereof) proving defective during said warranty
period. This warranty applies only to products which are used in
accordance with all instructions set forth in catalogs, manuals
and/or instruction sets furnished by Kreg Tool Company.
This warranty becomes effective only if the original
purchaser fully and properly completes product registration
online (www.kregtool.com) or calls Kreg Tool Company
Customer Service (1-800-447-8638).
This warranty is null and void if the product has been subjected
to (1) misuse, abuse or improper storage; (2) accident, neglect,
damage or other circumstances beyond Kreg Tool Company's
control; (3) modifications, disassembly, tampering, alterations or
repairs not authorized by Kreg Tool Company; and (4) for non-
original purchasers. This warranty does not apply to normal wear
and tear, corrosion, abrasion, or repairs required due to natural
causes or acts of God.
GENERAL SAFETY INSTRUCTIONS
EXTENSION CORD LENGTH
50'
75'
100'
150'
RECOMMENDED WIRE GAUGE
16
16
14
12
16
14
12
10
14
12
10
NR
12
NR
NR
NR
The metal parts of this product conduct
KREG TRACK HORSE LIMITED WARRANTY
EXPLANATION OF SAFETY SYMBOLS
FOUND ON THE TRACK HORSE
200'
12
NR
NR
NR
This is Kreg Tool Company's sole warranty. Any and all other
warranties which may be implied by law, including any warranties
for merchantability or fitness for a particular purpose, are hereby
limited to the duration of this warranty. Kreg Tool Company shall
not be liable for any loss, damage or expense directly or indirectly
related to the use of its products or from any other cause or for
consequential damages (including without limitation, loss of time,
inconvenience, and loss of production). The warranty contained
herein may not be modified and no other warranty, expressed or
implied, shall be made by or on behalf of Kreg Tool Company.
For your records the following information will
be useful in the event a warranty claim is required.
For complete records attach copy of proof of purchase.
Date of Purchase ___/___/___
Purchased From: ________________________________________
PINCH POINT
DO NOT STAND ON THE TRACK HORSE
DO NOT SIT ON THE TRACK HORSE
ALWAYS WEAR EYE PROTECTION
MAXIMUM LOAD, TWO TRACK HORSES
USED TOGETHER: 2200 LBS. [997 KG.],
EVENLY DISTRIBUTRED
Publicité
Table des Matières
