Publicité
Les langues disponibles
Les langues disponibles
Mon 16:00
To switch the appliance on and off:
•
Press and hold
- 3 slow beeps when the appliance is switched off.
Mon 16:00
- 3 fast beeps when the appliance is switched on.
To set the temperature:
•
Press and hold
- 2 beeps will be heard when the action is complete.
•
You can then set the temperature by turning the knob (horizontal and bottom models)
or by holding down the
- 1 beep will be heard every 0.5°C.
- 2 beeps will be heard when the temperature setting reaches 19°C.
- 2 beeps will be heard when the temperature setting reaches the lower limit (7°C)
or upper limit (28°C). The 2 beeps will continue to be heard if the temperature drops
below 7°C or rises above 28°C.
- 2 beeps will be heard when the temperature returns to 19°C.
The menu is locked when the accessibility function is activated.
To access it, press the menu button 4 times (press the knob for horizontal and bottom models,
press
for vertical models).
The touch buttons do not respond immediately when pressed.
Press and hold the button for 3 seconds to activate the desired function.
This gives visually impaired users time to locate the required button before it activates
anything.
Press three �mes
to access the Menu
If your appliance is in active planning mode:
•
You can temporarily change the temperature to suit your needs (e.g. the appliance
is programmed to heat to 15°C since you are usually out at this time of day. However, today
you are in and wish to override the program to set your appliance to 19°C).
•
In this case, the new temperature will be activated for the next 4 hours.
•
At the end of this period, the appliance will automatically return to the original program.
. An audible signal confirms that the action is complete.
to instantly set the temperature to 19°C. .
or
button (vertical model).
3X
71
Menu
My temperatures
My schedule
Prolonged absence
Informa�on
Parameters
EN
Publicité
