Hold Button - Doro 505 Manuel D'utilisation

English
Speaker Function
1. Press . The speaker will be activated and the LED indicator will
s
illuminate.
2. Dial the required telephone number. Adjust the volume control on the side
of the telephone.
3. Speak towards the microphone on the front edge of the telephone.
4. Press to terminate the call.
s
Please note!
During the course of a telephone conversation, you can switch from hands free speaker to
handset mode at any time by picking up the handset. Replace the handset to terminate the call.
Please remember that in hands free speaker mode, only one person at a time can talk. The
switch over between speaker and microphone is automatic and dependant on the sound level on
the incoming line and the microphone respectively. It is therefore essential that no loud noise in
the immediate surroundings of the telephone, as this will disrupt the speaker function.

Hold Button

Press to place an incoming call on hold.
z
The call can be resumed by pressing
The display will flash and the handset microphone will be inoperative for as long
as the function is active.
Redial Button
The five most recently dialled numbers can easily be redialled using
1. Press repeatedly, to scroll through the numbers.
r
2. Press , the selected number will now be dialled.
0
During the course of a telephone conversation, you can switch from hands free
speaker to handset mode at any time by picking up the handset.
6
Operation
again.
z
.
r
www.doro.com