English
Automatic network prex using economy routing (LCR)
The LCR function can be used also to insert numbers in front of all phone
numbers.
1. Press and hold
P
2. Press
twice. The display will show
P
3. Scroll to the desired function using
4. Press
. The left side of the display will flash.
0
5. The left side of the display must be empty.
If there's already a number entered here, erase it using C.
6. If you have entered less than four digits, press
of the display will flash.
7. Enter the new dialling sequence (up to eight digits, e. g. 950200).
If there's already a number entered here, it can be erased using C.
8. Confirm the programmed settings by pressing
12
Least Cost Routing
until Setup is shown, and then release.
Lcr
/
v
and
(active) or
on
oFF
.
V
to move on. The right side
0
.
0
(off).
www.doro.com