Doro 505 Manuel D'utilisation page 13

Troubleshooting
Telephone does not work
- Check that the telephone cord is undamaged and properly plugged in.
- Disconnect any additional equipment that may be connected. If the problem
is resolved, the fault is with the other equipment.
- Test the equipment on a known working line (e. g. at the neighbour's). If the
product works then the fault is with the line.
No number is shown when a call is received
- In order for this feature to function, you must subscribe to the Caller
Identification service from your network provider.
- If a message shows on the display, the call may be an international call (no
data received), or from a private or blocked number.
- It may not be possible to receive CID information if the phone operates in
a PBX system.
If the telephone still does not work, contact the place of purchase for service.
Don't forget the receipt or copy of the invoice.
Recall Time
The telephones recall timing is preset to, 100 milliseconds (UK and AU) and
600 milliseconds (NZ).
Guarantee (UK)
This product is guaranteed for a period of 12 months from the date of purchase.
Proof of purchase is required for any service or support required during the
guarantee period.
This guarantee shall not apply to a fault caused by an accident or any similar
incident or damage, liquid ingress, negligence, abnormal usage or any other
circumstances on the purchaser's part. Furthermore, this guarantee shall not
apply to a fault caused by a thunderstorm or any other voltage fluctuations.
This guarantee does not in any way affect your statutory rights. (As a matter of
precaution, we recommend disconnecting the telephone during a thunderstorm.)
www.doro.com
Other
English
13