Les langues disponibles

Les langues disponibles

π
H-11513
H-STAND CASTER KIT
TOOL NEEDED
12 mm Wrench
14 mm Wrench
Caster x 2
Adapter Plate x 2
1. Attach adapter plate to bottom of H-Stand using
3/8 x 1¼" bolts, washers and 3/8" flange nuts. Tighten
with 14 mm wrench. Repeat for all H-Stands.
(See Figure 1)
Figure 1
Adapter Plate
PAGE 1 OF 6
1-800-295-5510
uline.com
Washer x 12
Pivot Brace x 2
Knee Brace x 2
ASSEMBLY
H-Stand
PARTS
M8 x 20 mm Bolt x 8
3/8 x 1¼" Bolt x 12
2. Attach caster onto adapter plate using M8 x 20 mm
bolts and M8 flange nuts. Repeat for all H-Stands.
Tighten with 12 mm wrench (See Figure 2)
Figure 2
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
M8 Flange Nut x 8
3/8" Flange Nut x 12
Caster
Adapter Plate
0624 IH-11513
Table des Matières
loading

Sommaire des Matières pour Uline H-11513

  • Page 1 Para Español, vea páginas 3-4. Pour le français, consulter les pages 5-6. π H-11513 1-800-295-5510 uline.com H-STAND CASTER KIT TOOL NEEDED 12 mm Wrench 14 mm Wrench PARTS Washer x 12 Caster x 2 M8 x 20 mm Bolt x 8...
  • Page 5: Outil Requis

    π H-11513 1 800 295-5510 uline.ca ENSEMBLE DE ROULETTES POUR PIEDS DE SOUTIEN EN H OUTIL REQUIS Clé de 12 mm Clé de 14 mm PIÈCES Roulette x 2 Rondelle x 12 Boulon M8 x 20 mm x 8 Écrou à embase M8 x 8...
  • Page 6: Montage Suite

    6. Serrez complètement tous les boulons et écrous à REMARQUE : Ne serrez pas complètement les embase. boulons et les écrous freinés. Figure 4 Écrou à embase Renfort de pivot Boulon 1 800 295-5510 uline.ca PAGE 6 OF 6 0624 IH-11513...

Table des Matières