Barazza B DRAFT Notice De Montage Et Mode D'emploi page 48

How to activate:
press at the same time the push buttons
the chosen speed will be switched on.
press the push button
activated.
How to deactivate: press any push button with the exception of the light push button.
SOFT TOUCH CONTROLS WITH LEDS AND PUSH BUTTONS ON S/STEEL
To activate the functions connected to these push buttons, it is necessary to
apply a little pressure just lightly and for a short time. If pressure is too lengthy on
the push buttons the connected functions are not activated.
Switch the lights on and off.
Turn the motor off.
Increases the motor speed.
Reduces the motor speed.
TIMER: if pressed when the hood is already functioning with 1st, 2nd, 3rd
or 4th speed, the led point connected with the selected speed, starts to
flash for 10 minutes, after which motor automatically stops.
28
to confirm the speed at which the interval function will be
and / / ; the led corresponding to
1st Speed
2st Speed
3st Speed
Highest speed of the motor. After
10 minutes the second speed is
automatically set.