Publicité
A.1
Main Specifications
Configuration
Drive system
Media hold-down method
Cutting area
Mountable media width
Specifiable speeds
Max. acceleration
Specifiable speeds
Max. force
Settable force
Min. character size
Mechanical resolution
Programmable resolution
Distance accuracy
Right angle accuracy
Repeatable accuracy
Interface
Buffer memory
Resident command sets
Number of cutters/pens
Tool type
Compatible media
Offline output function
Bar code data management
function
LCD display
Usable roll paper
Power supply
Power consumption
Operating environment
Guaranteed accuracy
environment
External dimensions
(W × D × H)
Weigh (Approx.)
*1 : HP-GL is a registered trademark of the US Hewlett Packard Company.
*2 : Use CB30UC-1 without warpage
*3 : Use cutter blade CB15UA
*4 : Use Cutter blade CB15U-K30
*5 : Magnet and cut material that can be fixed by tape
*6 : Cut material that can be fixed by electrostatic adhesion
FCX2000-60VC
Flatbed
Digital servo
VC models: Vacuum suction
ES models: Electrostatic adhesion
MG models: Magnetic
610 mm × 920 mm
950 mm
400 mm/s (Omnidirection)
5.88 m/s
2
(Omnidirection)
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40 cm/s 16 steps
TOOL 1: Max. 4.9N (500gf) TOOL 2: Max. 9.8N (1Kgf)
TOOL 1: Set 40 steps TOOL 2: Set 40 steps
About 10mm
2
alphanumeric characters (depending on the materials and font)
0.0025 mm
GP-GL : 0.1/0.05/0.025/0.01 mm
HP-GL
: 0.025 mm
1
Distance moved within ±0.1% or less or within ±0.1 mm or less, whichever is larger (Plotter mode)
0.5mm/900 mm or less (Plotter mode)
0.1 mm or less: Expansion and contraction of the media are excluded (plotter/cutting mode)
USB2.0 (full speed) , RS-232C, Ethernet 10BASE-T / 100BASE-TX
2 MB
GP-GL/HP-GL
1
(Control panel switching, Auto switching)
2
VC models: Cutter Plunger, Water based fiber-tip pen, Oil-based ballpoint pen, Creasing tool
ES models: Cutter Plunger, Water based fiber-tip pen, Oil-based ballpoint pen, Creasing tool
MG models: Cutter Plunger, Water based fiber-tip pen, Oil-based ballpoint pen
VC models
• Marking film (PVC/fluorescence/reflection)
• Thickness less than 1 mm paper *2
• Thickness less than 0.8 mm compressed
foam sheet *4
• Thickness less than 1 mm sandblasting rubber
• F, G flute *2
• Clear package sheet
• High-intensity reflective film *3
USB memory - 64 files
Yes
Graphic type (240 × 128 dot)
Roll paper hanger
Usable roll paper width: 950 mm, weight: 5 kg
100 to 240V AC 50/60Hz
140 VA or less
10 to 35 , 35 to 75 % R.H. (non-condensing)
16 to 32 , 35 to 70 % R.H. (non-condensing)
1344 mm × 1409 mm × 930 mm
(Media stocker is included.)
76 kg (Including stand)
FCX2000-120VC/ES/MG
1200 mm × 920 mm
950 mm
ES models
• Marking film (PVC/fluorescence/reflection)
• Thickness less than 1 mm paper *2
• Thickness less than 1 mm sandblasting
rubber
• F, G flute *2
• Clear package sheet *6
193 4mm × 1409 mm × 93 0mm
(Media stocker is included.)
VC model : 99kg (Including stand)
ES model : 95kg (Including stand)
MG model : 93kg (Including stand)
A-2
FCX2000-180VC
1800 mm × 920 mm
950 mm
MG models
• Marking film (PVC/fluorescence/reflection)
• Thickness less than 1 mm sandblasting
rubber *5
2534 mm × 1409 mm × 930 mm
(Media stocker is included.)
116kg (Including stand)
Publicité
