IDEAL AP 100 Mode D'emploi page 68

AP 100
1 Fine Mesh Cleancel® Pre-Filter,

3 Active Carbon Filter replacement
Push the two buttons on the filter
①
cover at the bottom of the product
towards the middle and take the
cover off by pulling it towards you.
Hold the grips on either side of the
②
3 Active carbon filter and pull it
out. Hold the grips of the
2 Antimicrobial PM2.5 filter and
pull it out. Hold the grip on the front
of 1 Fine Mesh Cleancel® Pre-filter
and pull it out.
1
③
Fine Mesh Cleancel® Pre-Filter
Antimicrobial PM2.5 filter
carbon filter. Push the filters in this
order to the very back of the product.
X Please make sure that the
Push the two buttons on the filter
④
cover towards the middle to attach
it to the product.
3
pre-filter is not flipped upside
down before inserting.
X Only genuine IDEAL filters must be used.
Operating the air cleaner
2 Antimicrobial PM2.5 Filter,
2
Activated
- 68 -
| Operation
3 Active Carbon
filter
2 A ntimicrobial
PM2.5 filter
1 Fine Mesh Cleancel®
Pre-Filter