Before Initial Operation - Wolkenstein WDW 14-7FI TD Mode D'emploi

Displays the time delay, error codes or remaining operation time of a
programme.
5. Time delay
You can set a delayed programme start up to 24 hours (depending on model).
Press the delay-button to set the desired time. Multiple pressing increase the
value.
6. On/Off
To switch the appliance on/off.
7. Water supply control-indicator
The indicator will light if the water supply is in improper condition (e.g. shut
water tap, kinked hose etc.).
8. Dry+
Press this button and you can activate the additional function of Dry+
9. Half Load
You will activate Half Load function with this button .
10. 3in1-programme
Use this additional function in combination with programmes such as eco, light
or intensive
Set a programme (1) + close the door (2) = the appliance is ready
for operation (3).

4. Before initial operation

Before you start operating the appliance, check that
1. the appliance is positioned and levelled properly.
2. the inlet valve is opened.
3. the connections of the hoses do not leak.
4. the appliance is plugged in properly.
5. the power is switched on.
6. the hoses are not knotted.
7. you have removed the complete packaging material.
Before you operate the appliance for the first time:
A) Adjust the water softener.
B) Pour 500 ml water into the container of the water softener and pour in the water
softener (= dishwasher salt).
C) Pour in the rinse aid.
D) Select a washing programme.
A. Water softener
55