Wolkenstein WDW 14-7FI TD Mode D'emploi page 49

a: hole/10 mm depth.
4. Fixing of the front decoration-panel
1 4 pcs. 4*42 mm woodscrews
2 1.) Remove 2 pcs. 4*10
2.) 4 pcs. 4*42 woodscrews
3 Door of the appliance
4 T-shape plug
5 2 pcs. 4*26 mm woodscrews
6 Decoration panel
7 4 pcs. 4*42 mm woodscrews
5. Adjusting of the tension of the door-spring
After having installed the decoration-panel, try to open and close the door to check
its balance and to decide if it can remain in its installation-condition. When the door
is balanced improperly, turn the screws in clockwise and anti-clockwise direction for
proper adjustment (or let the balance adjust by an experienced person).
49