Cegla RC-cornet plus Mode D'emploi page 12

VIsual GuIDe assembly
I
a.
c. d.
f.
CoMBIneD theRapY / neBulIZeR ConFIGuRatIon
nebulizer
nOTe
Please follow the instructions for use of your nebulizer as well
as your inhalation device and your corresponding medication.
nebulizer ring
article no. 2650
22 | EN
b.
e.
g.
rc-cornet PluS
®
InstRuCtIons assembly
I
a. connect the one way valve with the adapter.
b. connect the mouthpiece centered with the adapter.
for using the device please follow the instructions
for use (see pages 18 and 19).
c. remove the cleaning aid from the valve tube.
d. connect the valve tube with the adapter and make
sure that the centering dot clicks into the cut-out of
the adapter.
e. Guide the piece into the body. Make sure that the
arrow on the adapter and on the body are aligned.
f. check the valve tube position. It should not be kinked.
g. reattach the body lid.
CoMBIneD theRapY / neBulIZeR ConFIGuRatIon
Combining RC-Cornet plus therapy with a standard Iso
®
nebulizer improves delivery of your nebulized medication
and reduces the total treatment duration. Furthermore the
effectiveness of both therapies is improved.
connect the rc-cornet PluS to your nebulizer. The nebuli-
®
zer is connected to the adpater. Please always use setting 1
of rc-cornet PluS for combined therapy. This setting opens
®
your airways and stabilizes them. Please inhale and exhale
only through the device. The treatment duration corresponds
with the nebulizer period.
note: a nebulizer ring is available for non ISO nebulizers.
The nebulizer and the nebulizer ring are not included. They
can be purchased separately. compatible nebulizers are lis-
ted at www.cegla.de
EN | 23