Disposal; Troubleshooting - Conrad XCA 200 Notice D'emploi

It is absolutely impermissible to repair fuses or bridge the fuse holder.
• After disconnecting the appliance from the power source (by disconnecting the car power supply!),
carefully remove the FUSE fuse from the fuse holder.
• Replace it by a fuse of the same type.
• Only then the amplifier should be re-connected to the car system and operated.

Disposal

If the appliance has become unusable, dispose of it in accordance with the current statutory
regulations.

Troubleshooting

In purchasing the Raveland Amplifier you have acquired a reliable product which has been designed
according to the state-of-art technology.
Problems and malfunctions may, however arise.
We would therefore like to describe how you can repair certain malfunctions yourself.
Always adhere to the safety instructions!
Problem
No function, the
indicator LED
POWER (5) does
not light up:
Solution:
• The GND connection of the connection terminal of the
power supply is not connected to the car body.
• The REMOTE connection of the connection terminal of the power supply
is not connected to the aerial control output of the car radio.
• +12V are not applied at the +12V connection of the connection terminal
of the power supply.
• The FUSE fuse of the amplifier or the fuse in the positive connection is
defect.
41