Product Description - Conrad XCA 200 Notice D'emploi

• Do not place open sources of fire such as burning candles onto the appliance.
• Consult suitably qualified staff, if you have doubts about how the equipment operates or about how to
connect it safely.
• Do not leave packaging material unattended. It can be dangerous to children who play with it.
• Never operate the appliance without supervision.
• Do not use the device in a tropical climate.
• Observe also the safety and operating instructions of any other devices which are connected to your
device.
• Also observe the additional safety instructions in each individual section of these instructions.
• If you are not sure about the correct connection or if questions arise which are not covered by
the operating instructions, please do not hesitate to contact our technical support or another
specialist.

Product Description

• MOSFET technology
• two stereo channels can be bridged in each case.
• 3 channel mode for stereo operation with subwoofer (only model XCA 400 and XCA 402)
• Super Bass Switch
• extreme steady PWM (pulse width modulation) power supply
• protective circuit in case of a short circuit at the loudspeaker outputs and overheating
• 2-ohm-steady loudspeaker outputs
• connectable active duplexer with adjustable cut-off frequencies
• remote control via the car radio
• turn-on delay to suppress interference noise at the turn-on moment
• champagne-coloured connection terminals
27