Publicité
Les langues disponibles
Les langues disponibles
Choosing the level of assistance on LCD display
When power is turned on, you can choose between 6 levels of assistance from the lowest (1) to the
highest (6). Press the "+" or "-" buttons to select one of these six levels of assistance. The chosen level
is displayed in the assistance indication area.
•
If you choose a high level of assistance (5 and 6), battery usage will go up and the effort needed
on the part of the user will be lower. These levels are suitable for slopes, headwind or heavy
loads.
•
Average support levels (3 and 4) mean that user effort and battery usage are equal.
•
The low assistance levels (1 and 2) mean that the propulsion of the bicycle comes more from
the effort of the user than from the use of the battery. These are therefore energy-saving
modes. We suggest that you use the level of assistance 1 when using the bicycle to play sports.
•
Level 0 means that assistance is switched off.
Pedestrian assistance on LCD display
Long press on the "-" button to use the "assisted start" function to make starting easier. When the
starting aid is used, the assistance does not exceed 6 km/h. The LCD will then show "6KM" above the
speedometer.
As soon as the "-" button is released, the start aid stops.
Adjusting the LCD display
To access the setting menu, press the "SET" button for 3 seconds. The SET setting icon flashes and the
setting 0 is selected. Settings:
0: Assistance mode. The selected mode is indicated by the ☑ icon. 3 modes are available, ECO
•
to optimize autonomy, POWER to optimize performance, NORMAL for a balance between
autonomy/performance. Choose your mode using the "+" and "-" buttons. Then press SET to
go to the next setting.
•
1: Reset mileage counter 1. Press "-" to reset it to 0. Then press SET to go to the next setting.
•
2: Maximum assistance speed limiter. It can be adjusted from 10 to 25km/h using the "+" and
"-" buttons. Then press SET to go to the next setting.
•
3 : Choosing the wheel diameter. You can select your wheel diameter from 16 to 28" with the
"+" and "-" buttons. Then press SET to go to the next setting.
WARNING: The adjustment of the wheel diameter has an impact on the safety and
health of your bicycle. Never select a different diameter than the one installed on
your bicycle. If you have any doubts, get in touch with your dealer.
•
4: Speed unit. Choose to display the speed in "Km/h" or "MPH" using the "+" and "-" buttons.
Then press SET to return to setting 0.
Hold down the SET button for 3 seconds to save and exit the setting menu. To exit without saving your
changes, press the ON/OFF button for 3 seconds to turn off the display.
49
Publicité
