Rectifying Faults - Siemens ET375MU11E Mode D'emploi

Rectifying faults

Indicator Fault
Blank There is no power supply. Check the household fuse for the appliance. Check
E
is flashing The control panel is
damp or an object is
resting on it.
F4
The electronics have
overheated and have
switched off the
appliance.
F8
The grill was in use for
too long and has
switched itself off.
42
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
Action
whether there is a power cut by trying other
electrical appliances
Dry the control panel or remove the object. Then
touch any control panel.
Wait until the electronics have cooled down
sufficiently. Then touch any control panel.
You can switch the grill back on again immediately.