Weighing; Tare - Soehnle Professional 7752 Mode D'emploi

5. Basic features

5.4 Weighing

CAUTION!
Serious injury to the baby by falling.
Baby scales are often placed on raised work surfaces. If the baby falls off the
work surface it can cause serious or fatal injuries. Never leave a baby
unattended on the scale.

5.5 Tare

Place the baby carefully on the scale.
The weight appears automatically when the scale is
loaded.
1. manual tare
Place the additional weight (e.g. a towel) on the
weighing platform and then press the tare key.
2nd manual tare input
You can enter a fixed tare value manually using the
tare input. For this purpose, this function must be assi
gned to the function key, which is described in Chapter
6.1 „Freely assignable function key" on page 16.
Press the function key.
Set the desired tare weight with the tare or function
key. By pressing briefly, the value is clocked up/down in
dividually. The display runs up or down with permanent
pressure.
With the print key, the set value can be permanently ac
cepted.
3 Delete tare
Briefly press the zero setting key and tare is deleted.
4th tare info
Press and hold the zero key to display the tare weight.
Press briefly to clear the tare weight. When pressed
and held until the weight display flashes, the tare
weight is not cleared.
37