General Information; Technical Specifications; Purpose Of Use - Soehnle Professional 7752 Mode D'emploi

3. General information

3.1 Technical Specifications
Scale type
Maximum capacity
Minimal load
Digit pitch
Taring range
Measuremnents scale (W x D x H)
Product weight
Power supply
Calibration class
Operating temperature
Storage temperature
Dampness
Air pressure

3.2 Purpose of use

The medical device is used to determine the weight of lying babies and may only
be used for this purpose. Any other use is prohibited. This scale is intended for use
in custody transfer. It complies with the applicable requirements of EC Directives
2014/30/EU, 2014/35/EU, 20104/31/EU and 2007/47/EC (93/42/EEC).
Notifications about errors that could endanger the baby, as well as about errors that
could lead to a falsification of measurement results must be reported in writing to
the manufacturer's medical device advisor.
This instruction manual is an integral part of the unit. The exact observance of these
instructions is a prerequisite for the proper use and correct operation of the device.
Please make sure that you do not permanently load the scale. In addition, shocks and
overloading of the scale that exceed the specified maximum load must be absolutely
avoided. This can damage the scale.
The scale may only be used in accordance with the described specifications. Devi-
ating areas of use / areas of application are subject to written approval by Soenhle
Industrial Solutions.
Class I medical device with measuring function.
Electrical protection class II (insulated, no protective conductor connection).
Water protection according to EN60529: IPX2 for the whole device.
30
Baby scale 7752
Dual-range scale
6 kg / 15 kg
40 g / 100 g
2 g / 5 g
100 % of maximum capacity
601 x 385 x 129 mm
100 - 240 V
50 / 60 Hz, 250 mA
Calibration class III, MPG class I
+ 10 °C bis + 40 °C
- 20 °C bis + 65 °C
20 % bis 85 % (non condensing)
950 bis 1.050 hPa
6,8 kg